Anti-entrapment function (driver’s and front passenger’s windows) Initialize the power window in the following procedure to reactivate such functions. 1. Close the driver’s door. 2. Turn the ignition switch to the “ON” position. 3. Open the driver’s side window halfway by pushing down the power window. switch. Driver side window will not operate, stuck in closed position. Would work intermittently but has stopped working completely. 2005 Chrysler Town & Country 98,000 mi, rickf178. Cold weather almost brings my drivers side window to a stop, been this way for about 3 winters. 2014 it will move about and inch and stop and if you wait about 30 seconds I drove around for 6 months with the driver side window not working. only rear windows worked from driver side. all other windows worked by the individual switch. I could not be bothered to fix the POS that I have driven for over 8 years and only a 150K on it. I didn’t have to do this elaborate a process. I entered from the passenger side and left the door open. Put the key in ON ‘II’ position. Rolled the window completely down and held the switch for an extra couple of seconds. Rolled it completely up and held the switch for an extra couple of seconds. Voila. Swapping it out was really not too difficult. First disconnect the battery, then remove the lower trim panel under the steering column, unplug all the wiring harnesses going into the fuse block front and back, remove three mounting bolts and take it out. Thank you again for the assistance. 2. Reply Quote. Press enter to search. Passenger power window switch not working. You and use the drivers side window switch to operate passenger window. Replaced switch and still same problem. The window switch lock is not on. Help. Clicking this will make more experts see the question and we will remind you when it gets answered. .

power window switch not working